CME 4.1 w 2600XM 196D/32F

1. Install Standard IP Voice c2600-ipvoicek9-mz.124-4.XC6.bin
2. Download cme-124-4XC.zip
3. TFTP cme-bacd-2.1.2.2.tar & cme-gui-7.0.0.1.tar onto the flash:
4. Extract them onto the flash – ‘archive tar /xtract filename.tar flash:’
5. Enable HTTP Server – ‘ip http server’
6. Enable the Telephony Service – ‘telephony-service’
7. Set the max umbers of directory names ‘ max-dn 50’
8. Set the max munber of ephones ‘max-ephones 50’
9. Set the source IP address and port # The IP is the IP of the CCME
CCME(config-telephony)#ip source-address 10.1.7.99 port 2000
10. Browse to the device – ‘ip_address/ccme.html’
11. Login as Cisco / Cisco

Adding Phone Loads

1. TFTP the phone loads into flash: #There can be one or more files
i.e. P00308000900.loads
P00308000900.sb2
P00308000900.sbn
2. Set the phone load
CCME(config-telephony)#load 7940 P00308000900
3. Add the files to the TFTP service:
tftp-server flash:P00308000900.loads
tftp-server flash:P00308000900.sb2
tftp-server flash:P00308000900.sb


Support site:
http://www.thewaystation.com/techref/3725voip.shtml


IOS: c2600-ipvoicek9-mz.124-11.XJ4.bin 25.6MB
- CME 4.1 CME GUI 4.0.3.0 (192M / 48F)

IOS: c2600-advipservicesk9-mz.124-15.T7 23.2MB
- CME 4.1 CME GUI 4.1.0.2 (192M / 48F)


CME 7.0 only supports the 2800's and 3800's.
CME 4.2 only supports the 2800's, 3700's and the 3800s.
CME 4.1 was the last to support the 2600XMs.

http://www.thecruftofmybrain.com/2008/04/10/cme-and-asterisk-part-3-end-of-the-trilogy/
1760 as CME


CME # archive tar /extract tftp://192.168.100.96/cme-basic.tar flash:

dir flash:
show flash:

tftp-server flash: P0030702T023.bin
tftp-server flash: P0030702T023.loads
tftp-server flash: P0030702T023.sb2ip
tftp-server flash: P0030702T023.sbn

telephony-service
load 7941 P0030702T023.bin
max-ephone x
max-dn x
ip source-address x.x.x.x
create cnf-files