Autonomous AP - Multiple SSID

(by default Cisco AP will ONLY broadcast 1 SSID per dot11radio interface)

1) Add the SSID's to the AP and use the "mbssid guest-mode" command to broadcast it
!
dot11 ssid TEST1
mbssid guest-mode
!
dot11 ssid TEST2
mbssid guest-mode
!

2) enable mbssid globally on your radio-interface

!
interface Dot11Radio0
mbssid
ssid TEST1
ssid TEST2
!

NOTE: if you just use the "guest-mode" command under the SSID it will NOT broadcast but 1 SSID at a time per dot11radio... so "mbssid guest-mode" is your friend